300 FTC bounty for the one that can give me the best cgminer settings
-
Have a park of sapphire 7950 cards.
Now i have between 530-570hash pr card.The one that gives me best cgminer settings regarding stability/hash speed will recieve 300ftc :)
It goes to say that the settings need to get my hash above my current state. -
[quote name=“svennand” post=“19969” timestamp=“1373021915”]
Have a park of sapphire 7950 cards.
Now i have between 530-570hash pr card.The one that gives me best cgminer settings regarding stability/hash speed will recieve 300ftc :)
It goes to say that the settings need to get my hash above my current state.
[/quote]try…
-w 256 --gpu-powertune 5 --intensity 20 -g 1 --thread-concurrency 21712 --gpu-engine 1125 --gpu-memclock 1600.
-
What is your sdk, catalyst and driver? and OS… :)
-
Run in administrator CMD prompt:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1Then:
-I 20 -g 1 -w 256 --thread-concurrency 22400 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 -
running xubuntu/cgminer 3.3.1
using the litecoin guide which uses:
fglrx-updates/fglrx-amdccle-updates/fglrx-updates-devso as im understanding using the latest version available.
im no linux geek so please dont make me trolling around linux to find stuff:Pwill start to test out one at the time
-
[quote name=“Nutnut” post=“19970” timestamp=“1373022511”]
[quote author=svennand link=topic=2543.msg19969#msg19969 date=1373021915]
Have a park of sapphire 7950 cards.
Now i have between 530-570hash pr card.The one that gives me best cgminer settings regarding stability/hash speed will recieve 300ftc :)
It goes to say that the settings need to get my hash above my current state.
[/quote]try…
-w 256 --gpu-powertune 5 --intensity 20 -g 1 --thread-concurrency 21712 --gpu-engine 1125 --gpu-memclock 1600.
[/quote]Gives me an average of 2283khahs (570,5 pr card) with jumping from 500-600 up and down=)
My old stat was 2215khash (553,75 pr card) with pretty stable around 550khash.Temp however seems to be lower then previouse, now its 70-76degrees, before it was 77-80
[quote author=capriciousmike link=topic=2543.msg19977#msg19977 date=1373027916]
Run in administrator CMD prompt:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1Then:
-I 20 -g 1 -w 256 --thread-concurrency 22400 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500
[/quote]Allready had those setx commands. Do however question the powertune to 20? isnt that a bit over the board? do not want another barbecue
-
OK. Bump the TC to 22336
-
[quote name=“Nutnut” post=“20005” timestamp=“1373032576”]
OK. Bump the TC to 22336
[/quote]Gives me an average of 2310 (577,5 pr card), fairly stable with cards dipping down to 500 sometimes.
Temperature stays the same -
ok tc 22400 it is
-
[quote name=“MrFeathers” post=“20014” timestamp=“1373035392”]
GPU_MAX_ALLOC_PERCENT 100and
thread-concurrency" : “21712”,
“worksize” : “256”,
“kernel” : “scrypt”,
“intensity” : "19 or 20
“gpu-threads” : “1”,
“temp-target” : “74”,
“temp-overheat” : “80”,
“gpu-engine” : “1075”,
“gpu-memclock” : “1650”Engine and memclock are most important. See if these get stable above 600.
[/quote]ur in the lead with 2410 average (602,5hash pr card) not peaking below 600khash
temp stable from 70-76 -
[quote name=“MrFeathers” post=“20025” timestamp=“1373038528”]
Those previous settings are Ye olde Faithful but I would also try1115 gpu/ 1500 mem with Thread concurrency 20480, intensity 19, g 1
and setting powertune in trixx at +15% or 20%
That might bump it higher.
[/quote]I dont have trixx running linux=)
hmm 15-20% what do that equal in power tune -
lol i was supposed to say that i got a mix from both of you that seemed to be excellent.
then this happend:
http://50.87.190.116/monitoring/
my entire park down -
[quote name=“d2” post=“20047” timestamp=“1373041972”]
Anyway, try these:[code]“intensity” : “20,20,20”,
“vectors” : “1,1,1”,
“worksize” : “256,256,256”,
“kernel” : “scrypt,scrypt,scrypt”,
“lookup-gap” : “2,2,2”,
“thread-concurrency” : “21712,21712,21712”,
“shaders” : “0,0,0”,
“gpu-engine” : “0-1100,0-1100,0-1100”,
“gpu-fan” : “0-85,0-85,0-85”,
“gpu-memclock” : “1500,1500,1500”,
“gpu-memdiff” : “0,0,0”,
“gpu-powertune” : “20,20,20”,[/code]This gives stable ~650kh on the sapphire vapor x 7950s with boost enabled. Not sure which sapphires you have.
[/quote]averaging 2557 with theese settings.
temp from 73-81.So far you seem to be in the lead=P, will let it run for a while to check stability and/or if them goes way up
EDIT:
hmm i see that the fans are pushing max. thats not good in the long run. i have sapphire 7950 “with boost”: http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1157&pid=1841&psn=&lid=1&leg=0 -
Seems D2 takes the victory!
Pushing 1500khash extra from my rigs total.Now i just need to sell my CRAPPY XFX 7970 cards with their mesely 490khash each and change the 7970 with hw error to an 7950 (only rig with mixed cards…).
With those extra 3 7970 cards i will recieve, +two 7970 +1 7950 beeing idle i should be able to go to at least 14mhash.Nutnut im closing in ;D
-
Hmm do seem that fuzzy3 rig do not handle the new settings…
4x 7950
GigabyX58 dh3 motherboard
Intel i7 920 socket 1366
4gb memory
xubuntu 13.04
Seasonic x1250 psu
powered extenders.Any idea what to do?
This rig has done the same before when i pushed it…EDIT:
Forgot to mention, the computer does not crash, only the cgminer hard crash, so i have to remote reboot the computer (headless) -
[quote name=“MrFeathers” post=“20121” timestamp=“1373056653”]
My money is on a heat related issue. I would try setting fan speed to fixed at least 85% and add a big fan behind the cards and see if it will run stable. Ive had cg miner crashing randomly even though it wasnt showing temps out of the 70s till I put fan speed fixed to at least 85%.
[/quote]hmm you might be right.
Rotated the 420mm fan a little bit (one fan covers both fuzzy2 and three for a total of 8 cards)
Also set fan-speed to 85% damn that got loud=P, but it seems stable for now -
[quote name=“d2” post=“20047” timestamp=“1373041972”]
Anyway, try these:
…
This gives stable ~650kh on the sapphire vapor x 7950s with boost enabled. Not sure which sapphires you have.
[/quote]I have Sapphire Vapor-x 7950. This works fantastically! Thank you!
-
[quote name=“capriciousmike” post=“20132” timestamp=“1373058084”]
[quote author=d2 link=topic=2543.msg20047#msg20047 date=1373041972]
Anyway, try these:
…
This gives stable ~650kh on the sapphire vapor x 7950s with boost enabled. Not sure which sapphires you have.
[/quote]I have Sapphire Vapor-x 7950. This works fantastically! Thank you!
[/quote]thats what the forum is for (great D2!) =)
why not express your thanks trough here: http://forum.feathercoin.com/index.php?topic=2521.0 8)
sure want ftc to gain more ground/value -
[quote name=“MrFeathers” post=“20121” timestamp=“1373056653”]
My money is on a heat related issue. I would try setting fan speed to fixed at least 85% and add a big fan behind the cards and see if it will run stable. Ive had cg miner crashing randomly even though it wasnt showing temps out of the 70s till I put fan speed fixed to at least 85%.
[/quote]Woke up to fuzzy3 beeing crashed today=)
so no doesnt seem to be due to temp. everything is well cooled -
[quote name=“d2” post=“20224” timestamp=“1373089220”]
[quote author=svennand link=topic=2543.msg20219#msg20219 date=1373087464]
Woke up to fuzzy3 beeing crashed today=)
so no doesnt seem to be due to temp. everything is well cooled
[/quote]Too much power draw from PSU? What exactly do you mean by crashed? PC rebooted or cgminer crash
[/quote]sorry bad explaining. Cgminer is completely frozen.
when i killall the application and try to rerun cgminer it just autofreeze.
not even ./cgminer -n will work.Have to restart computer for it to work again.